The idea of installing solar panels in your home might seem like a daunting task, but it doesn’t have to be.
Installing solar panels in Adelaide can make your house more valuable and provide you with enough savings over time to pay for the cost of installation. However, many homeowners avoid this prospect because they think it would take too much time and money. With these ten easy steps below, you will learn how to install solar panels for yourself quickly and easily!
Step 1: Measure the space you have available
The first thing you need to do is measure the area where your solar panels will be installed. The surface of each panel measures around 69cm x 125 cm, or a little bigger than two square feet per panel. If you want to install six panels, you need an installation area measuring around nine square feet.
Step 2: Determine how many solar panels you want to install
The number of solar cells that you should have installed on your rooftop will depend mainly on your house’s size, orientation, and energy output. A good rule-of-thumb is between four and eight photovoltaic (PV) modules per household electrical panel. If you are unsure, you should research and determine how many solar panels your household needs.
Step 3: Calculate Your Solar Energy Usage
The amount of power that your solar panels Adelaide will produce is dependent on the amount of sunlight they receive and how much energy you use at any given time. Therefore, to determine precisely how many solar cells (and thus, panels) to buy, you need to know both these numbers: How many kilowatt-hours per day do you consume, and how many hours per day is the sun shining on your installation area?
Step 4: Check for Overheating Risk in Your Roofing Surface
If you’re installing solar panels over an existing roof, it’s essential to determine if any materials pose a risk of overheating. Sure, shingles can release gases that can damage solar panels and even cause fires. It’s essential to check with your roofing contractor to ensure that the materials you have chosen will be safe for use on your rooftop before installation begins.
Step 5: Identify Your Electricity Company
If you plan on selling excess electricity back to the grid, it’s essential to find out which energy company you will be using. This is because the electricity companies in Australia do not all use the same technology, and some are more compatible with solar panel systems than others. Currently, Ausgrid is the only power company that uses a smart meter system designed for homes running on solar panels and batteries (the other major players – Jemena, Powershop and ActewAGL have yet to install smart meters in your area).
Step 6: Set Up a Powerwall Battery for Your Solar Panel System
A Tesla power wall battery is the best option for those who want their solar panels to store up energy during daylight hours. It’s essential to ensure that your solar panels are not exposed to the elements, which is why installing a backup battery for both charging and storing energy during daylight hours can be very beneficial.
Step 7: Connect Your Solar Panels
Once you have installed your photovoltaic cells on the roof of your house, it’s time to connect the panels to the main electrical panel. It will enable you to draw on solar power when sunlight is available and also store up energy for later use in your battery system if necessary. This connection must be made by a qualified electrician who can provide an installation certificate so that any excess electricity sold back to the grid can be properly tracked.
Step 8: Ensure Safety When Using Solar Panels
Solar panels are safe to use, but you must take precautions to ensure your safety when using them. For example, the rooftop installation area must be free of debris and obstructions so that the solar cells can access sunlight easily. You should also protect your solar cells with an enclosure by using a specially designed railing or placing your panels behind special glass.
Step 9: Decide on the Best Mounting System
The type of system you use to mount your photovoltaic modules will depend mainly on what kind of roofing material is being used and where it’s being installed. For example, if you’re installing solar panels Adelaide over a metal roofing surface, then there are special mounting brackets that can be used to do so safely and securely. It is essential to use the right kind of system for your specific needs to avoid damaging or overheating any parts of your rooftop during installation.
Step 10: Don’t Forget the Safety Equipment
Solar panel installation requires a lot of tools and equipment. At a minimum, you should have safety glasses on hand to protect your eyes from any debris or other hazards during the process. You should also invest in suitable quality gloves to avoid injuring yourself with sharp edges or other objects.
BONUS TIP: Hire Professional Services
You don’t have to install your solar panel system yourself. If you’re not into DIY, you can always opt for professional installation from an Adelaide-based company that can provide you with services such as solar panel system installation, maintenance and repairs. For more information, visit our official website now.
Conclusion
Solar panel installation doesn’t have to be complicated. As long as you know what you need to do, the pressure of installing solar panels becomes easier every step of the way. For more amazing guides and discussions about solar power, check out our blog page.
